Photo of author

How to Clean Oncloud Shoes: A Comprehensive Guide

Are your Oncloud shoes looking a little worse for wear? Don’t worry, we’ve got you covered with this comprehensive guide on how to clean your beloved Oncloud shoes. Whether they’re covered in mud from your last adventure or just in need of a little freshening up, we’ll walk you through the step-by-step process to get them looking as good as new. So, let’s dive in and give your Oncloud shoes the TLC they deserve!

Table of Contents

Preparing Your Oncloud Shoes for Cleaning

Before you start cleaning your Oncloud shoes, it’s crucial to prepare them properly. Follow these steps to ensure the cleaning process goes smoothly:

1. Remove the Laces and Insoles

Start by removing the laces and insoles from your Oncloud shoes. This will make it easier to clean all the nooks and crannies of the shoes and prevent any damage to the laces during the cleaning process.

2. Brush Off Excess Dirt and Debris

Using a soft-bristled brush or an old toothbrush, gently brush off any excess dirt and debris from the surface of your Oncloud shoes. Pay special attention to the areas where dirt tends to accumulate, such as the outsoles and crevices.

3. Knock the Shoes Together

To further remove loose dirt and debris, gently knock the soles of your Oncloud shoes together. This will help dislodge any stubborn particles and make the cleaning process more effective.

4. Check for Stains and Tough Spots

Inspect your Oncloud shoes for any stains or tough spots that may require special treatment. Note their locations so you can address them later in the cleaning process.

Cleaning the Exterior of Your Oncloud Shoes

The exterior of Oncloud shoes can be made of various materials, such as mesh or leather. Follow these steps to clean the exterior of your Oncloud shoes effectively:

1. Removing Stains from Mesh Shoes

If your Oncloud shoes have a mesh exterior, follow these steps to remove stains:

1. Create a Cleaning Solution

Mix a small amount of mild detergent or laundry soap with warm water to create a cleaning solution. Avoid using harsh chemicals, as they may damage the mesh material.

2. Dip a Soft Cloth in the Cleaning Solution

Take a soft cloth or sponge and dip it into the cleaning solution. Make sure the cloth is damp, not soaked, to prevent excessive moisture from seeping into the shoes.

3. Gently Scrub the Stained Areas

Using the damp cloth, gently scrub the stained areas of your mesh Oncloud shoes. Apply light pressure and circular motions to lift the stains without damaging the mesh material.

4. Rinse with Clean Water

After scrubbing, rinse the shoes with clean water to remove any remaining detergent. Make sure to remove all soap residue to prevent it from attracting dirt and causing discoloration.

5. Air Dry Your Oncloud Shoes

Place your Oncloud shoes in a well-ventilated area and allow them to air dry naturally. Avoid using direct heat sources, such as a hairdryer or radiator, as they can warp or damage the shoes.

2. Cleaning Leather Oncloud Shoes

If your Oncloud shoes have a leather exterior, follow these steps to clean them:

1. Remove Surface Dirt

Start by using a soft brush or cloth to remove any surface dirt or dust from your leather Oncloud shoes. Gently brush in the direction of the grain to avoid scratching the leather.

2. Prepare a Leather Cleaner

Choose a leather cleaner specifically designed for shoes and follow the instructions on the product label to prepare the cleaner. Avoid using household cleaners or harsh chemicals that can damage the leather.

3. Apply the Leather Cleaner

Using a clean cloth or sponge, apply a small amount of the leather cleaner to the stained or soiled areas of your Oncloud shoes. Work the cleaner into the leather using gentle circular motions.

4. Wipe Off Excess Cleaner

After applying the leather cleaner, use a clean, damp cloth to wipe off any excess cleaner from the shoes. Make sure to remove all traces of the cleaner to prevent it from drying and leaving residue on the leather.

5. Condition the Leather

Once the shoes are clean and dry, apply a leather conditioner to restore moisture and prevent the leather from cracking or drying out. Follow the instructions on the conditioner’s label for best results.

6. Polish and Buff

To give your leather Oncloud shoes a polished and shiny finish, use a soft cloth to apply a leather polish or wax. Buff the shoes in gentle, circular motions to achieve a glossy appearance.

3. Eliminating Odors from Oncloud Shoes

No one likes smelly shoes! Here’s how you can eliminate odors from your Oncloud shoes:

1. Sprinkle Baking Soda

Generously sprinkle baking soda inside your Oncloud shoes, targeting the areas where odors are most prominent. Baking soda is a natural odor absorber that helps neutralize unpleasant smells.

2. Let It Sit Overnight

Allow the baking soda to sit inside your shoes overnight. This will give it enough time to absorb odors effectively.

3. Vacuum or Shake Out the Baking Soda

In the morning, use a vacuum cleaner with a brush attachment to remove the baking soda from your shoes. Alternatively, you can shake the shoes vigorously outdoors to remove the baking soda.

4. Use Odor Absorbing Inserts

If odors persist, consider using odor-absorbing inserts specifically designed for shoes. These inserts are typically made with activated charcoal, which helps absorb and eliminate odors.

4. Restoring Shine to Oncloud Shoes

To restore the shine of your Oncloud shoes, follow these steps:

1. Clean the Shoes

Before restoring shine, make sure your Oncloud shoes are clean and free from dirt or stains. Refer to the previous sections for detailed instructions on cleaning the exterior of your shoes.

2. Apply a Shoe Polish

Choose a shoe polish that matches the color of your Oncloud shoes. Apply a small amount of the shoe polish to a soft cloth and rub it onto the shoes in circular motions. Make sure to cover the entire surface evenly.

3. Buff the Shoes

After applying the shoe polish, use a clean cloth or shoe brush to buff the shoes. Buffing helps distribute the polish evenly and gives your Oncloud shoes a glossy shine.

5. Addressing Stains and Tough Spots

If you’ve identified stains or tough spots on your Oncloud shoes, follow these methods to address them:

1. Removing Oil or Grease Stains

If your Oncloud shoes have oil or grease stains, try the following method:

a. Blot the Stain

Immediately blot the stain with a clean cloth or paper towel to absorb as much oil or grease as possible. Avoid rubbing the stain, as it can spread and embed the stain further into the material.

b. Apply Cornstarch or Talcum Powder

Cover the oil or grease stain with a generous amount of cornstarch or talcum powder. These powders help absorb the remaining oil or grease from the shoes.

c. Let It Sit

Allow the cornstarch or talcum powder to sit on the stain for several hours or overnight. The powder will gradually absorb the oil or grease from the shoes.

d. Brush Off the Powder

Using a soft brush or cloth, gently brush off the powder from the shoes. You should notice a significant improvement in the appearance of the stain.

e. Repeat if Necessary

If the stain persists, repeat the process until the oil or grease stain is completely removed. If the stain is still stubborn, consider using a specialized stain remover designed for the specific material of your shoes.

2. Treating Mud and Dirt Stains

If your Oncloud shoes have mud or dirt stains, follow these steps to treat them:

a. Let the Mud Dry

Allow the mud to dry completely on your shoes. Trying to clean wet mud can result in spreading the stain and making it harder to remove.

b. Brush Off Excess Dirt

Using a soft brush or cloth, gently brush off any excess dried mud or dirt from the surface of your Oncloud shoes. Be careful not to scratch or damage the material.

c. Prepare a Cleaning Solution

M

c. Prepare a Cleaning Solution

Mix a small amount of mild detergent or laundry soap with warm water to create a cleaning solution. The gentle detergent will help break down the dirt and remove the stain without damaging the shoes.

d. Dip a Soft Cloth in the Cleaning Solution

Take a soft cloth or sponge and dip it into the cleaning solution. Make sure the cloth is damp, not soaked, to prevent excessive moisture from seeping into the shoes.

e. Gently Scrub the Stained Areas

Using the damp cloth, gently scrub the stained areas of your Oncloud shoes. Apply light pressure and circular motions to lift the dirt and stains without damaging the material.

f. Rinse with Clean Water

After scrubbing, rinse the shoes with clean water to remove any remaining detergent and dirt. Make sure to remove all soap residue to prevent it from attracting more dirt and causing discoloration.

g. Air Dry Your Oncloud Shoes

Place your Oncloud shoes in a well-ventilated area and allow them to air dry naturally. Avoid using direct heat sources, such as a hairdryer or radiator, as they can warp or damage the shoes.

Dealing with Insoles and Footbeds

To maintain comfort and freshness, it’s essential to clean the insoles and footbeds of your Oncloud shoes. Here’s how:

1. Remove the Insoles

Take out the insoles from your Oncloud shoes. Most insoles are removable and can be easily pulled out. This step allows you to clean them thoroughly.

2. Hand Wash the Insoles

Fill a sink or basin with warm water and add a small amount of mild detergent or laundry soap. Submerge the insoles in the soapy water and use your hands to gently scrub them.

3. Rinse and Air Dry the Insoles

After washing, rinse the insoles with clean water to remove any soap residue. Squeeze out excess water and place them on a clean towel or rack to air dry completely.

4. Clean the Footbeds

To clean the footbeds of your Oncloud shoes, follow these steps:

a. Remove Excess Dirt

Use a soft brush or cloth to remove any loose dirt or debris from the footbeds. This will make the cleaning process more effective.

b. Create a Cleaning Solution

Mix a small amount of mild detergent or laundry soap with warm water to create a cleaning solution. This gentle solution is safe to use on the footbeds of your shoes.

c. Scrub the Footbeds

Dip a soft brush or cloth into the cleaning solution and gently scrub the footbeds of your Oncloud shoes. Pay attention to any stained or soiled areas, and make sure to clean them thoroughly.

d. Rinse with Clean Water

After scrubbing, rinse the footbeds with clean water to remove any remaining detergent. Make sure to rinse off all soap residue for optimal comfort and cleanliness.

e. Air Dry Your Oncloud Shoes

Place your Oncloud shoes in a well-ventilated area and allow them to air dry naturally. Ensure that the footbeds are completely dry before reinserting the insoles and wearing the shoes.

Washing the Shoelaces

Shoelaces can accumulate dirt and grime over time, affecting the overall cleanliness of your Oncloud shoes. Follow these steps to wash and restore your shoelaces:

1. Remove the Shoelaces

Take out the shoelaces from your Oncloud shoes. This will allow you to clean them separately and ensure a thorough cleaning process.

2. Soak the Shoelaces

Fill a bowl or sink with warm water and add a small amount of mild detergent or laundry soap. Submerge the shoelaces in the soapy water and let them soak for a few minutes.

3. Gently Scrub the Shoelaces

Using your hands or a soft brush, gently scrub the shoelaces while they are in the soapy water. Pay attention to any stained or soiled areas and give them a thorough cleaning.

4. Rinse the Shoelaces

After scrubbing, rinse the shoelaces with clean water to remove any remaining detergent. Ensure that all soap residue is washed off for a fresh and clean result.

5. Air Dry the Shoelaces

Hang the shoelaces or lay them flat on a clean towel to air dry. Avoid using direct heat sources, as they can cause the shoelaces to shrink or become damaged.

Drying Your Oncloud Shoes

Properly drying your Oncloud shoes is essential to prevent damage and maintain their shape. Here are different methods for effective drying:

1. Air Drying

Air drying is the most natural and recommended method for drying your Oncloud shoes. Simply place them in a well-ventilated area, away from direct sunlight or heat sources, and allow them to dry naturally. This method helps prevent shrinkage and maintain the integrity of the materials.

2. Stuff with Newspaper

If your Oncloud shoes are particularly wet or soaked, you can speed up the drying process by stuffing them with crumpled newspaper. The newspaper will help absorb moisture and promote faster drying. Replace the newspaper as needed until the shoes are completely dry.

3. Use a Shoe Dryer

If you have a shoe dryer or a specialized shoe drying device, you can use it to dry your Oncloud shoes. Follow the manufacturer’s instructions for best results and avoid using excessive heat, as it can damage the shoes.

4. Avoid Heat Sources

Regardless of the drying method you choose, always avoid direct heat sources, such as hairdryers, radiators, or heaters. Excessive heat can cause the materials to warp, shrink, or become damaged.

Storing Your Oncloud Shoes

Proper storage is crucial to maintaining the condition of your Oncloud shoes. Follow these tips to store them correctly:

1. Clean and Dry the Shoes

Before storing your Oncloud shoes, make sure they are clean and completely dry. Any remaining dirt or moisture can lead to mold growth or deterioration of the materials during storage.

2. Use Shoe Trees or Stuff with Newspaper

Place shoe trees or stuff the shoes with crumpled newspaper to help maintain their shape. This prevents them from developing creases or losing their original form while in storage.

3. Store in a Cool, Dry Place

Choose a cool, dry area for storing your Oncloud shoes. Excessive heat or humidity can cause the materials to deteriorate or develop a musty odor. Avoid storing them in basements, attics, or areas prone to moisture.

4. Keep Away from Direct Sunlight

Direct sunlight can fade the colors and damage the materials of your Oncloud shoes. Always store them away from windows or any other sources of direct sunlight to preserve their appearance and quality.

5. Use Dust Bags or Shoe Boxes

If you have the original dust bags or shoe boxes that came with your Oncloud shoes, use them for storage. These protective covers can prevent dust accumulation and provide an extra layer of protection.

Preventive Measures for Keeping Your Oncloud Shoes Clean

Taking preventive measures can help keep your Oncloud shoes clean for a longer period. Here are some tips to minimize the need for deep cleaning:

1. Use a Protective Spray

Consider using a protective spray specifically designed for the material of your Oncloud shoes. These sprays create a barrier that repels dirt, water, and stains, making it easier to clean and maintain your shoes.

2. Avoid Wearing in Harsh Conditions

While Oncloud shoes are durable, it’s best to avoid wearing them in harsh conditions that can cause excessive dirt or damage. If possible, reserve them for activities or environments where they are less likely to get dirty or scuffed.

3. Clean Regularly

Regularly clean your Oncloud shoes to prevent dirt and stains from settling in. Wiping them down with a damp cloth after each use and brushing off surface dirt can go a long way in maintaining their cleanliness.

4. Rotate Your Shoes

Rotating your shoes and giving them a break between wears allows them to air out and reduces the accumulation of odors. This also helps prevent excessive wear and tear on a single pair of shoes.

5. Follow Manufacturer’s Care Instructions

Always refer to the care instructions provided by the manufacturer for specific cleaningand maintenance guidelines for your Oncloud shoes. Following the recommended care instructions ensures that you are taking the appropriate steps to keep your shoes clean and in good condition.

Cleaning Oncloud Shoes for Different Activities

Oncloud shoes are designed for various activities, and each may require specific cleaning techniques. Here’s how to clean your Oncloud shoes after different activities:

1. Cleaning Oncloud Shoes After Running

After a run, your Oncloud shoes may be sweaty and dirty. Follow these steps to clean them:

a. Remove Excess Dirt

Using a soft brush or cloth, gently brush off any loose dirt or debris from the shoes. This will prevent the dirt from embedding further into the material during the cleaning process.

b. Spot Clean Stains

If you notice any stains on your Oncloud shoes, mix a small amount of mild detergent with warm water to create a cleaning solution. Use a clean cloth or sponge to spot clean the stained areas. Rinse with clean water to remove any detergent residue.

c. Air Dry Thoroughly

After cleaning, allow your Oncloud shoes to air dry completely. Place them in a well-ventilated area away from direct heat sources or sunlight. Ensure they are fully dry before wearing them again or storing them.

2. Cleaning Oncloud Shoes After Hiking

Hiking can expose your Oncloud shoes to dirt, mud, and other outdoor elements. Follow these steps to clean them after a hike:

a. Remove Excess Dirt and Debris

Using a soft brush or cloth, gently brush off any loose dirt or debris from the shoes. Pay attention to the outsoles and crevices, where dirt tends to accumulate the most.

b. Rinse with Water

Take your Oncloud shoes outdoors and rinse them with a gentle stream of water. Use a hose or a bucket to remove any remaining dirt or mud from the shoes. Avoid using excessive pressure, as it can damage the shoes.

c. Clean with Mild Soap and Water

Prepare a mixture of mild detergent or laundry soap with warm water. Dip a soft brush or cloth into the soapy water and gently scrub the shoes, focusing on any stubborn stains or dirt. Rinse thoroughly with clean water.

d. Air Dry Completely

After cleaning, place your Oncloud shoes in a well-ventilated area and allow them to air dry completely. Make sure both the exterior and interior of the shoes are dry before wearing or storing them.

3. Cleaning Oncloud Shoes After Everyday Wear

Even with regular use, your Oncloud shoes may accumulate dirt and odors. Follow these steps to keep them clean and fresh:

a. Remove Loose Dirt

Before cleaning, use a soft brush or cloth to remove any loose dirt or debris from the shoes. This will prevent the dirt from spreading and embedding further during the cleaning process.

b. Wipe with a Damp Cloth

Dampen a clean cloth with water and gently wipe down the exterior of your Oncloud shoes. Pay attention to any stained or soiled areas, giving them a little extra attention. Avoid soaking the shoes or using excessive moisture.

c. Spot Clean Stains

If there are any stubborn stains on your Oncloud shoes, mix a small amount of mild detergent with warm water to create a cleaning solution. Dip a cloth or sponge into the solution and gently scrub the stained areas. Rinse with clean water to remove any detergent residue.

d. Eliminate Odors

To tackle odors, sprinkle baking soda inside your Oncloud shoes and let it sit overnight. In the morning, shake out the baking soda or use a vacuum cleaner to remove it. The baking soda will absorb any unpleasant odors.

e. Air Dry Thoroughly

After cleaning, ensure your Oncloud shoes are completely dry before wearing or storing them. Place them in a well-ventilated area and allow them to air dry naturally. Avoid using direct heat sources, as they can damage the shoes.

Handling Stubborn Stains and Marks

Despite your best efforts, stubborn stains and marks may still appear on your Oncloud shoes. Here are some methods to tackle those tough stains and restore your shoes’ pristine appearance:

1. Removing Grass Stains

Grass stains can be tough to remove, but with the right approach, you can eliminate them:

a. Pre-Treat the Stain

Apply a small amount of stain remover or a mixture of water and mild detergent directly to the grass stain. Gently rub the solution into the stain using a soft brush or cloth.

b. Launder the Shoes

If the shoes are machine-washable, place them in a mesh laundry bag and wash them on a gentle cycle with cold water and mild detergent. This will help remove the grass stain effectively.

c. Hand Wash the Stained Area

If the shoes are not machine-washable, hand wash the stained area using a cloth or sponge dampened with cold water and mild detergent. Gently scrub the stain and rinse thoroughly.

d. Air Dry Completely

After cleaning, allow your Oncloud shoes to air dry completely. Place them in a well-ventilated area and avoid using direct heat sources. Check that the stain is fully removed before wearing or storing the shoes.

2. Treating Ink Stains

Ink stains can be challenging to remove, but with the right approach, you can minimize their appearance:

a. Blot the Stain

As soon as you notice an ink stain, gently blot it with a clean cloth or paper towel to absorb as much ink as possible. Avoid rubbing the stain, as it can spread and make the situation worse.

b. Apply Rubbing Alcohol

Dampen a cotton ball or cloth with rubbing alcohol and dab it onto the ink stain. Gently blot the stain, frequently switching to clean areas of the cloth or cotton ball, until the ink starts to lift.

c. Rinse and Clean

Rinse the affected area with cold water to remove any remaining alcohol or ink residue. If necessary, use a mild detergent or stain remover to clean the area further. Rinse thoroughly and air dry.

3. Removing Scuff Marks

Scuff marks can appear on the surface of your Oncloud shoes, but they can be easily eliminated:

a. Baking Soda Paste

Mix a small amount of baking soda with water to create a paste-like consistency. Apply the paste to the scuff mark and gently scrub it with a soft cloth or brush. Rinse with water and air dry.

b. Magic Eraser

Use a magic eraser sponge to gently rub the scuff mark. The sponge’s abrasive texture helps lift the scuff without damaging the shoe’s material. Wipe away any residue with a clean, damp cloth.

c. Toothpaste

Apply a small amount of non-gel toothpaste to the scuff mark. Using a soft cloth or brush, gently scrub the area in circular motions. Rinse with water and air dry.

Professional Cleaning and Repair Options

If your Oncloud shoes require professional attention or repair, consider these options:

1. Professional Cleaning Services

Research local professional shoe cleaning services that specialize in cleaning and restoring athletic shoes. These professionals have the necessary expertise and equipment to deep clean and rejuvenate your Oncloud shoes.

2. Shoe Repair Shops

If your Oncloud shoes have suffered significant damage, such as sole separation or torn fabric, take them to a reputable shoe repair shop. The professionals there can assess the damage and provide appropriate repairs to extend the lifespan of your shoes.

3. Manufacturer’s Warranty

If your Oncloud shoes are still within the warranty period, check with the manufacturer for any repair or cleaning services they offer. Some manufacturers provide warranty coverage for certain damages or defects.

4. DIY Repairs

If you are comfortable with DIY repairs, you can find online tutorials or guides on how to fix specific issues with your Oncloud shoes. However, be cautious, as improper repairs can further damage the shoes.

Congratulations! You now have a comprehensive guide on how to clean your Oncloud shoes. By following the steps outlined in this article, you can ensure your shoes stay in top shape, no matter what adventures you embark on. Remember to regularly clean and maintain your shoes to prolong their lifespan and keep them looking as good as new. With a little care and attention, your Oncloud shoes will continue to provide comfort and style for many miles to come.

Related video of How to Clean Oncloud Shoes: A Comprehensive Guide